Flow Matched Fuel Injector – Compatible with Volvo C70 2.3L (1999 – 2004), V70 2.3L & 2.5L (1999 – 2004), S60 2.3L & 2.5L (2001 – 2004), and S80 2.3L & 2.5L (2004 – 2006) – 0280155830

Description

Description:

• Direct replacement of your old injector and no modification needed.
• The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.

Specification:

• O-Rings Included: Yes, preinstalled
• Orifice Type: 4 holes disc
• Material: Metal, Plastic
• Color: Blue
• Voltage: DC 12V
• OE Number: 0280155830, 62686, 91860600, 874430
• Pin Number: 2
• Dimension: 7.3×2.9x2cm / 2.87″x1.14″x0.79″(L*W*H)
• Flow rates at 43.5 psi/3 bar 34.6 lb per hour261.2 G per min.(N-Heptane)363.3 cc per min

Note:

• This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
• Please check the fitment section of this listing before you bid.
• Please kindly check again your engine volume!
• This is a non-OEM product, accessory only!

Fitment:

• for Volvo C70 2.3L 1999-2004
• for Volvo V70 2.3L 2.5L 1999-2004
• for Volvo S60 2.3L 2.5L 2001-2004
• for Volvo S80 2.3L 2.5L 2004-2006

Package Included:

• 1 x Fuel Injector

Installation:

• Step 1: Make sure the engine is cool down. Disconnect the battery.
• Step 2: Remove the bolts and brackets from the fuel rail.
• Step 3: Disconnect the plug on each injector.
• Step 4: Lift the fuel rail and remove the injector from the fuel rail.
• Step 5: Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
• Step 6: Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
• Step 7: Double check for fuel leaks before and after starting the engine.